ContactBook a call

Industries/ Real estate/ Inspection and snagging apps

The inspection report finished before you leave site, even in a basement

Inventories, check-ins, mid-term inspections, check-outs and new-build snagging are done on a phone or tablet, room by room, with marked-up photos, meter readings and signatures. The report reaches the landlord, tenant or buyer before the inspector is back in the car, and every defect is already a job.

A property inspector in an empty new-build flat photographing a wall with a tablet, tape measure clipped to the belt.
Used by
Inventory clerks, property managers, site and handover teams
Takes the place of
Clipboards, camera rolls and reports typed up in the evening
Connects to
Your property management system, repair jobs and e-signature
Built with
Our staff & field apps service

Where it hurts today

A normal week, before it exists

An inspection today usually means a clipboard or a notes app, a hundred photos on a personal phone and an evening typing it all into a template. The photos are matched to rooms from memory, and the scuff on the hall skirting ends up filed under the landing. The report reaches the tenant days later, by which time their boxes are in and they no longer agree with what it says.

At check-out, the comparison means flicking between a PDF from a year ago and a camera roll. When a deposit is disputed, the adjudicator wants dated evidence of each item's condition at the start and the end, room by room. An undated photo of a carpet and an inventory the tenant never signed rarely win the argument, however obvious the damage looked on the day.

On a new development, a site manager walks each plot with the buyer or their inspector, writes defects on a sheet and takes photos on his own phone. A spreadsheet reaches the subcontractors days later. Nobody is quite sure which snags are fixed before handover, the buyer's list and the builder's list disagree, and the warranty paperwork lives somewhere else again.

What it does

Inspection and snagging apps, feature by feature

An inspection app has to be quicker than a clipboard on the day and stronger than one in a dispute a year later. This is how.

  1. 01

    Inventory templates, room by room

    Your own inventory, inspection and snagging forms, rebuilt as room-by-room checklists: walls, floors, windows, fixtures, appliances, meters and keys. Items carry forward, so a mid-term visit starts from what the check-in recorded and the clerk notes only what has changed.

  2. 02

    Dated photos attached to each item

    Each photo is taken inside the item it shows, stamped with the date, time and room, and can be marked up with arrows and notes. Nothing sits loose in a camera roll, and images are compressed on the device so a five-bedroom house does not use up a data allowance.

  3. 03

    Offline inspections, no signal needed

    Everything is saved on the device first. A basement flat, a plant room or a new block with no network yet is an ordinary visit. The app syncs when it finds a connection and shows the inspector exactly which reports and photos are still waiting to upload.

  4. 04

    Snagging with defects assigned on site

    A snag or repair found during an inspection becomes a defect with a trade, a pin on the floor plan and a photo. It goes to the subcontractor or your contractor list as a job, and at the next visit the inspector can see whether it was closed and how.

  5. 05

    Check-out compared with check-in

    At check-out the app shows the check-in photo and note beside each item, so the clerk records the difference rather than the whole house again. Fair wear and tear and damage are marked separately, with both sets of evidence side by side for the deposit conversation.

  6. 06

    Signed and sent before you leave

    The tenant, landlord, buyer or site manager signs on screen, or receives a link to review and comment within a period you set. The report is produced as a PDF with its photos and sent to everyone it concerns before the inspector drives away.

A day with it

How the day runs instead

A day that starts with lettings inspections and ends at a new-build handover.

  1. 8.30am
    Inventory clerk

    The clerk opens today's list: a check-in, a mid-term inspection and a check-out. The tablet downloaded each property's last report overnight, so the basement flat where phones get no signal is no problem.

  2. 9.15am
    Inventory clerk

    In the kitchen she works through cupboards, appliances and the meter reading, photographs a chip on the worktop and circles it. The tenant walks round with her and signs on the tablet at the door. Both parties have the report by email before ten.

  3. 11am
    Property manager

    At the mid-term inspection the app records a broken extractor fan and black mould starting above the shower. Both become repair jobs with photos, and the mould is flagged for the manager to look at herself rather than sent straight to a contractor.

  4. 2pm
    Site manager

    On plot 14 the site manager walks the house with the buyer. Each snag is pinned on the floor plan, photographed and assigned to the painter, the joiner or the electrician. The buyer signs the list on the tablet and receives a copy.

  5. Thursday
    Subcontractor

    The painter opens his list, fixes three snags and closes each with a photo. The site manager sees plot 14 has two items left before Friday's handover, and goes to check those two himself before the buyer arrives.

What it connects to

Works with what you already run

Inspections start from what your systems already know and end by updating them, so nothing is typed in twice.

  • Property management system

    Properties, tenancies and booked inspections come from it, and the finished report and its date go back against the tenancy, where it offers an API or a document upload.

  • Repair and contractor jobs

    Defects and repairs found on an inspection are raised as jobs in your maintenance process or job system, with the photos attached, instead of being written up as a list for someone to retype.

  • Build programme or plot list

    For developments, plots, house types, floor plans and handover dates come from your programme, and snag status goes back, so sales and customer care see the same picture as site.

  • E-signature and document storage

    Reports are signed in the app or through an emailed link, then filed where you choose with the original photos, ready for a deposit adjudicator, an insurer or a warranty claim.

The first version

Start small, then grow it

A first version should be useful on day one and small enough to get right. This is where we would usually draw the line, and what tends to follow once people are using it.

In the first version

  • Your check-in, inspection and check-out templates, room by room, on phone or tablet
  • Photos stamped with date, time and room, with simple mark-up
  • Full offline working with a clear upload status
  • On-screen signatures and a PDF report sent from site
  • Reports filed against the property in your management system

Once it is in use

  • Snagging on floor plans with defects assigned to subcontractors
  • Check-out shown side by side with check-in for every item
  • Repairs raised as jobs with your approved contractors
  • Inspection scheduling and route order for each clerk's day

Buyer's guide

Before you commission one

Four decisions worth making before you choose or commission an inspection app.

  1. 01

    An inventory app, or a custom one

    Packaged inventory and inspection apps are mature and suit most agencies and independent clerks doing check-ins, mid-terms and check-outs. Choose one if your forms are standard and reports can live in its portal. Custom earns its place when you need lettings and new-build snagging in one tool, unusual forms, or defects flowing into your own repairs and plot systems.

  2. 02

    What to gather first

    Your current templates for each inspection type, a few recent reports including one that was disputed, the deposit or condition report rules in each market you work in, the devices your clerks and site staff use, and for developments, plot lists, house types and floor plans. The disputed report shows what the evidence has to survive.

  3. 03

    Who should own it

    The head of lettings or block management owns the lettings templates, and a construction or customer care manager owns snagging. Between them they agree what must be photographed, what makes a report complete and who may amend one after signing. Someone in operations also owns the devices: enrolment, losses and leavers.

  4. 04

    How you will know it is working

    Watch how long a report takes from arriving on site to being sent, how many go out the same day, how many check-outs can be compared item by item with their check-in, and how deposit disputes turn out over time. On developments, watch the snags still open at handover and how long each takes to close.

Terms worth knowing

The words you will meet

Inventory and schedule of condition
A dated record of what is in a property and the condition of each item, room by room, usually with photos. Made at check-in and compared at check-out, it is the main evidence when a deposit deduction is disputed, so detail and dates matter more than polish.
Fair wear and tear
The deterioration expected from ordinary use during a tenancy, which a landlord generally cannot charge a tenant for. Adjudicators weigh it against the length of the tenancy and the age of each item, so an inspection that records age and condition clearly helps everyone argue less.
Pre-completion inspection
Under the UK's New Homes Quality Code, a buyer from a registered developer can have the home inspected before completion using a standard checklist. Snags found then, or later, go to the developer, and unresolved complaints can go to the New Homes Ombudsman Service. Your snagging records are the evidence for both sides.

Handled with care

The details that matter here

An inspection report is evidence. These are the details we handle carefully so it holds up when someone questions it.

  • Evidence that keeps its date

    Photos and notes carry the time from the device and from the server when they sync. A signed report is locked, and anything added later is recorded as a dated amendment rather than an edit. We agree with you what adjudicators and insurers in your market expect to see.

  • People's homes on camera

    Inspections photograph tenants' belongings and sometimes the tenants. We shape the templates around the fabric and fittings, let the clerk delete accidental shots before upload, and agree with your data protection lead who can view the photos and how long they are kept.

  • Shared and lost devices

    Clerks and site staff often share tablets or use their own phones. We use company sign-in, encrypted storage on the device and remote removal of the app's data, so a tablet left on a site can be locked out from the office the same day.

  • Your forms and your history

    We rebuild your current forms rather than impose ours, keep any wording your market prescribes, and bring past check-in inventories across where they exist in a usable form, so the first check-out on the new app can still be compared with a check-in done the old way.

Guides

Worth reading first

Questions

What buyers ask first

Can one app handle inventories and new-build snagging?

Yes, if it is designed for both from the start. Lettings inspections are organised by room and item and compared over time. Snagging is organised by plot, floor plan and trade, and closed by subcontractors. Both need photos, signatures and offline working, so one app with two kinds of template is sensible, and your clerks and site teams learn one tool instead of two.

Will inspection reports stand up in a deposit dispute?

Nobody can promise that, because the decision belongs to the adjudicator. In England and Wales, deposits sit in one of three approved schemes, and a dispute stays with the scheme until it is resolved. What we design for is the evidence adjudicators ask for: dated photos for each item, check-in and check-out side by side, and a signature or a record that the tenant received the report.

What happens if the tenant refuses to sign the inventory?

The clerk records that they declined, and the report goes to the tenant by email with a link to review it and add comments within the period you set. Their comments are attached as dated notes rather than changes to the report. You also have a record of when it was sent and when it was opened, which matters later.

Can the app produce condition reports in our state's format?

We can build the template to match. In New South Wales, for example, the condition report follows a prescribed form, and the tenant must be given two paper copies or one electronic copy before signing or moving in. Other states, New Zealand, the UK and the US each set their own expectations. We build each template with your compliance lead and keep any official wording intact.

Do inventory clerks need new phones or tablets?

Usually not. The app runs on recent iPhones, iPads and Android devices. Tablets suit long inventories, and phones suit quick mid-term visits. We check the devices you already have before recommending anything, and where reports hold tenants' personal details, we will explain why company-managed devices are the safer choice and what managing them involves.

How many evenings go on typing up inspections?

Send us one recent report with names removed. We reply within 48 hours with how it would be captured on site, and what it would take to send it before the clerk leaves.

More for real estate

What else we build for real estate