ContactBook a call

Industries/ Real estate/ Maintenance requests that route themselves

Every repair report triaged and on its way, unless it is dangerous

Reports arrive by phone, email, text and the portal, and each one is sorted by trade and urgency, matched to an approved contractor and chased until it is closed. Anything that sounds like gas, electrics, water coming in or a vulnerable tenant skips the routine and goes straight to a named person.

A plumber in a residential hallway checking job details on a phone before starting work, toolbox on the floor.
Used by
Property managers, maintenance coordinators and contractors
Takes the place of
The shared repairs inbox, call notes and chasing by phone
Connects to
Your property management system, contractor list, email and SMS
Built with
Our workflow automation service

Where it hurts today

A normal week, before it exists

Monday starts with the weekend's repairs: voicemails, emails with photos, texts to a manager's own mobile, a few portal reports and a page of notes from the out-of-hours line. Someone reads each one and decides whether it is a dripping tap or water coming through a ceiling. Then they look up who manages the property, which landlord owns it, and which contractor covers that trade in that postcode.

Then the chasing begins. The job is raised, the contractor emailed, the landlord told and the tenant updated. When the contractor does not reply, someone rings. When the quote is over the landlord's limit, someone waits for approval. Meanwhile the tenant rings to ask what is happening. The job may live in the property software, but its real status lives in one coordinator's head and notebook.

On a busy week one report slips. A message about a damp patch sits unread under thirty others, and a fortnight later it is mould, a complaint and sometimes a legal duty with a deadline nobody noticed starting. Out of hours is worse: a voicemail about a leak at nine on a Friday night can wait until Monday morning, when the office finally hears it.

What it does

Maintenance requests that route themselves, feature by feature

Most repair reports are routine and can be routed by rules. The design work is in the ones that are not.

  1. 01

    One queue for every repair channel

    The repairs mailbox, portal reports, texts to your repairs number and notes from the out-of-hours line all land in one queue against the right property. Two reports about the same leak from the flat above and the flat below are linked to one job instead of becoming two.

  2. 02

    Repair triage by trade and urgency

    Each report is classified by trade, such as plumbing, electrics, roofing, locks, appliances, pests or damp, and given one of your own urgency categories. The reasoning is shown beside it, so a coordinator can see why it chose plumbing within 24 hours and change it in one click.

  3. 03

    Safety reports go straight to a person

    Words and photos that suggest gas, exposed wiring, water coming in, fire, structural damage or a vulnerable occupant stop the automation. The duty manager is phoned or texted with the report, and out of hours it moves down your on-call rota until somebody acknowledges it.

  4. 04

    Matched to an approved contractor

    Contractors are matched by trade, area, the landlord's preferred suppliers and whether their insurance and registrations are in date. If the first choice declines or does not answer in time, the job moves to the next name and the coordinator is told.

  5. 05

    Landlord approval limits respected

    Jobs under the agreed spending limit go ahead. Jobs over it, or on properties where the landlord wants to approve everything, wait with the quote and photos attached, and the landlord is reminded if they have not answered. Emergencies follow the rule your management agreement sets.

  6. 06

    Chased until the job is closed

    Contractors are reminded to book and to close. Tenants hear when a slot is booked and are asked to confirm the fix. Jobs past their target appear on a manager's list each morning, and every message is kept against the property with its time.

A day with it

How the day runs instead

A wet Friday into the weekend at a management company with the routing running.

  1. 4.10pm
    Tenant

    A tenant emails photos of a damp patch spreading on the bedroom ceiling, below the bathroom upstairs. Within minutes the report is classified as plumbing within 24 hours, attached to the flat and its landlord, and the tenant receives a reference and what happens next.

  2. 4.25pm
    Maintenance coordinator

    The coordinator sees the job raised to the block's usual plumber, with the reason it was chosen. She changes nothing. A second report arrives from the flat upstairs about a leaking bath, and it is linked to the same job rather than opened as a new one.

  3. 9.40pm
    Duty manager

    A tenant on another street texts that the boiler cupboard smells of gas. The automation stops. The duty manager's phone rings with the report and the emergency number. She calls the tenant, then the gas emergency line, and logs what she advised and when.

  4. Saturday
    Contractor

    The plumber accepts the Friday job, books Saturday morning, finds a failed seal round the bath and closes it with photos. His quote for repairing the ceiling below is over the landlord's limit, so it waits for approval with the photos attached.

  5. Monday 9am
    Property manager

    The manager opens the weekend summary: what came in, what was routed, what escalated and who acknowledged it. One landlord approval is still outstanding. She rings that landlord, and does not have to chase a single contractor.

What it connects to

Works with what you already run

Routing sits between the channels tenants use and the systems that hold your properties and contractors. It writes jobs where your team already looks.

  • Property management system

    Properties, tenancies, landlords and management agreements are read from it, so each report lands on the right unit. Jobs and their updates are written back as works orders where it offers an API.

  • Contractor records

    Trades, areas, preferred landlords and the expiry of each contractor's insurance and registrations. A contractor whose insurance has lapsed is skipped, and the coordinator is told why the next one was chosen.

  • Email, SMS and messaging

    The repairs mailbox, a text number and business messaging accounts where the provider allows it. Replies to updates are threaded back onto the job rather than landing in somebody's personal inbox.

  • Out-of-hours service and on-call rota

    Notes from your out-of-hours call handlers arrive in the same queue, and your rota decides who is phoned for an emergency on any given night, and who is next if they do not answer.

The first version

Start small, then grow it

A first version should be useful on day one and small enough to get right. This is where we would usually draw the line, and what tends to follow once people are using it.

In the first version

  • One branch's repairs mailbox and portal reports in a single queue
  • Classification by trade and urgency, with the reasoning shown beside it
  • Safety words and photos escalated to the duty manager
  • Jobs raised to your approved contractors and written to your system
  • Acknowledgements and updates to tenants by email and text

Once it is in use

  • Landlord approvals for quotes above the agreed spending limit
  • Automatic fallback to the next contractor when one does not respond
  • Out-of-hours call notes and an on-call rota with escalation
  • A monthly view of response times by contractor and trade

Buyer's guide

Before you commission one

Before automating repairs, settle these four things. They decide whether the routing is trusted or quietly switched off.

  1. 01

    Your works order module, or a routing layer

    If your property software already raises and tracks works orders well, keep it and add only the intake and triage in front. Dedicated repair reporting products exist for lettings and social housing, and may suit a simple operation. A custom routing layer earns its place when reports arrive by many channels, contractor rules are complicated, or several systems each hold part of the picture.

  2. 02

    What to gather first

    Three months of past repair reports with their outcomes, your urgency categories and target times, the approved contractor list with trades, areas and insurance dates, each landlord's spending limit and your out-of-hours rota. Most of all, the words and situations your managers treat as dangerous, because the safety rules start from that list.

  3. 03

    Who should own it

    Your head of maintenance or senior coordinator owns the rules: urgency categories, contractor order and the safety list. A named duty manager owns escalations each night. Someone senior agrees who may change a rule and who signs it off, so a busy week does not loosen the safety list without anyone deciding to.

  4. 04

    How you will know it is working

    Watch the time from report to job raised and from job raised to attended, how often coordinators override the triage, and how many tenants chase for updates. Read every escalation in the first months to check nothing dangerous was routed as routine. Rising overrides mean the rules need attention, not that the team is wrong.

Terms worth knowing

The words you will meet

Triage
Sorting each report by what it is and how urgent it is before anyone acts. In repairs that means trade, urgency category and whether it is a safety matter. Good triage shows its reasoning, so a coordinator can see why a leak was marked 24 hours and correct it.
Works order
The instruction to a contractor to carry out a specific repair, with the property, the problem, access details, a price or limit and a reference. It is what the invoice is later matched to, so a clear works order saves arguments at both ends of the job.
Awaab's Law
Rules for social landlords in England, in force since 27 October 2025, that set deadlines for dealing with hazards. Emergency hazards must be investigated and made safe within 24 hours, and significant damp and mould has its own timescales. The government plans to extend it to private renting, with timing subject to consultation.

Handled with care

The details that matter here

Automation in repairs is only safe if it knows when to stop. These are the details we design most carefully.

  • A person decides anything dangerous

    We agree the list of safety signals with your managers, lean towards escalating when in doubt, and test the rules against a batch of your past reports before anything goes live. The automation never tells a tenant a problem is safe or advises them what to do.

  • Every decision can be seen and changed

    Each classification, contractor choice and reminder is logged with its reason, and your team can override any of them. We review the overrides with you in the first weeks and adjust the rules, rather than leave them to drift.

  • Vulnerable tenants

    Where your records flag a tenant as vulnerable, their reports skip the routine queue and are shown to a person. That flag is sensitive in itself, so we agree with your data protection lead how it is recorded, who can see it, and what a contractor is told.

  • Evidence of when you knew

    Repair complaints, disputes and statutory timescales often turn on dates. We keep the original report, the photos, every message and each change of status with its time, so you can show when a problem was reported, who was sent and when it was closed.

Guides

Worth reading first

Questions

What buyers ask first

Can software be trusted to triage repairs?

For routine reports, with a person watching at first. It is good at telling a dripping tap from a broken lock and finding the right plumber. It is not trusted with danger, so anything that looks unsafe goes to a person. Before it raises a single job on its own, we run it on real reports beside your coordinator, compare its choices with theirs and adjust the rules.

Will repair automation replace our maintenance coordinator?

It takes away the reading, copying and chasing, not the judgement. Coordinators still handle the emergencies, the awkward access, the landlord who wants to talk it through and the contractor relationships that keep jobs moving. Decisions about roles are yours, and the projects that go well are the ones coordinators helped design.

Can tenants still report repairs by phone?

Yes. Staff log a call in a short form that drops into the same queue, and notes from your out-of-hours service arrive the same way. A report that came in by phone is routed, chased and recorded exactly like one from the portal, so the tenant who would rather ring is not treated as second class.

How does Awaab's Law affect repair reporting?

If you are a social landlord in England, it already does. Since 27 October 2025, emergency hazards must be investigated and made safe within 24 hours, and significant damp and mould investigated within 10 working days, with more hazards added in phases from October 2026. The clock can start when a report arrives, so we record that time and build the timers with your compliance lead. For private landlords, an extension is planned, with timing subject to consultation.

Do we need this if our software has a works order module?

Perhaps not all of it. If your property software raises and tracks jobs well, we connect the intake and triage to it and write jobs there, rather than building a second job list. Your team keeps working in the screen they know, and the routing does the reading, matching and chasing around it.

What came into your repairs inbox last weekend?

Send us a week of repair reports with names removed. We reply within 48 hours with how each would have been sorted, which would have gone straight to a person, and where the rules need your judgement.

More for real estate

What else we build for real estate