Industries/ Logistics/ Paperwork read automatically
Delivery notes and PODs read on arrival and matched to the right job
Signed delivery notes, consignment notes, customs documents and haulier invoices are read as they arrive, by photo, scan or email. References, signatures and handwritten remarks are pulled out and matched to the consignment, and anything the system is unsure of goes to a person to check.

- Used by
- Traffic office, accounts, export and billing staff
- Takes the place of
- Retyping delivery notes, matching PODs by hand and chasing scans
- Connects to
- Your transport system, driver app, inbox and accounts software
- Built with
- Our document intelligence service
Where it hurts today
A normal week, before it exists
Paper reaches the office from every direction. Drivers hand in signed delivery notes at the end of a shift, or photograph them in the cab, creased and half in shadow. Subcontracted hauliers email scans in batches at the end of the week. International loads come back with CMR notes and customs paperwork. Each one has to be found, read and matched to the right consignment before anyone can invoice or close the job.
Matching is slow because the documents never line up neatly with the system. The customer wrote their own PO number instead of your consignment number. The signature is there but the printed name is not. Somebody at goods-in wrote 'two cartons damaged' in the margin, and that note matters more than anything else on the page, because it decides who pays. A person reads every sheet to find it.
Haulier invoices are a second pile. Each subcontractor bills in their own layout, with waiting time, extra drops and fuel surcharges added in ways that have to be checked against what was agreed. Someone in accounts ticks each line against the job list by hand. When that person is on holiday the pile grows, and the subcontractors start ringing to ask when they will be paid.
What it does
Paperwork read automatically, feature by feature
What happens to each document from the moment it reaches you, whether it comes from a driver's phone, a depot scanner or an email inbox.
- 01
Reads PODs, CMR notes and invoices as they arrive
Phone photos from the cab, scans from the depot, PDFs attached to emails and the occasional fax saved as a file. Each type of document you receive is read for consignment numbers, dates, pallet counts, stamps and whether a signature is present, without asking anyone to change how they send it.
- 02
Handwritten remarks found and flagged
Notes such as 'signed unchecked', 'one pallet short' or 'wrapping torn' are picked out and attached to the consignment as a remark. A damage claim or a short delivery is visible to the account manager on the day, not discovered when the customer refuses an invoice.
- 03
Automatic matching to the consignment
Each document is matched to a consignment using your reference, the customer's reference, the date and the delivery address together, not one field alone. When the references disagree, the likely matches are shown side by side and a person chooses.
- 04
A confidence score on every field
Every value carries a measure of how sure the system is. You decide which fields can go through on their own and which always need a person: any document with a remark, for example, any customs value, or any invoice line that does not match a job.
- 05
Bad POD photos retaken at the drop
If a driver's photo is too dark, blurred or cut off, the driver app says so straight away and asks for another while the driver is still standing at the delivery point. That is far easier than finding an unreadable note in the office three days later.
- 06
Haulier invoice checking against jobs
Subcontractor invoices are read line by line and compared with the jobs you gave them and the rates you agreed. Lines that match are marked ready to approve. Waiting time, extra drops or surcharges that do not appear on the job are held for accounts to query.
A day with it
How the day runs instead
A normal day in the traffic office and accounts, with documents arriving all day and being read as they come in.
- 7.15amTraffic clerk
Paperwork from the night trunk and an export load arrived overnight, and most of it is already matched. The clerk opens the review queue and finds four documents waiting, each shown beside its suggested consignment, and clears them before planning starts.
- 10.30amDriver
A driver photographs a signed note at a drop. The app rejects it because the signature box is in shadow, so the driver takes it again in the light by the van's open door. The second photo is read and matched before they pull away.
- 11.00amAccount manager
A delivery note arrives with 'two cartons crushed' written beside the signature. It is flagged as a remark, the account manager sees it on the consignment that morning, calls the customer, and logs the claim while everyone still remembers the drop.
- 2.00pmExport clerk
The export clerk checks the documents for tomorrow's trailer. Commercial invoices and packing lists have been read and their references compared, and one shipment shows a gross weight that does not match the booking. The clerk queries it before loading.
- ThursdayAccounts clerk
The week's haulier invoices are read as they arrive. Most lines already match agreed jobs and are marked ready. The accounts clerk spends the afternoon on the three lines that do not, rather than ticking every line against a printout.
What it connects to
Works with what you already run
Documents come in from several places, and the results have to land where your team already works.
Driver app
Proof-of-delivery photos are read as soon as they sync from the driver's phone, and a rejected image goes back to the driver with a short reason, so they can take it again at the drop.
Shared inboxes and scanners
A dedicated email address and the depot scanner feed documents straight in. Subcontractors and customers keep sending the way they do now, and each document is logged with when and how it arrived.
Transport management system
Consignment references, customers, addresses and delivery dates are read from your transport system for matching, and the matched document, any remarks and the new status are written back against each job.
Accounts software
Approved haulier invoices and confirmed proof for billing are passed on, for example to QuickBooks or Microsoft Dynamics 365 where they offer an API, each with a link back to the original document.
The first version
Start small, then grow it
A first version should be useful on day one and small enough to get right. This is where we would usually draw the line, and what tends to follow once people are using it.
In the first version
- Signed delivery notes read from drivers' photos and depot scans
- Consignment number, date, signature and remarks pulled from each note
- Automatic matching to the consignment, with unsure matches held for a person
- A review screen showing each document beside its suggested match
- Unreadable photos sent back to the driver while they are still at the drop
Once it is in use
- Subcontractor invoices read and checked against agreed jobs and rates
- CMR notes and export paperwork read and cross-checked for each trailer
- Customer orders read from emails and attachments and turned into new jobs
- Remarks about damage or shortage opened as claims for the account manager
Buyer's guide
Before you commission one
Four decisions worth making before you automate the reading of delivery paperwork.
- 01
A packaged OCR product or a custom pipeline
Packaged POD OCR and intelligent document processing products read common documents well and are quick to try. If your paperwork is mostly clean, printed and from a few senders, start there. Custom work earns its place when documents must be matched against your own TMS data, when remarks drive claims, or when haulier invoices need checking against agreed rates.
- 02
What to gather first
Collect a few hundred real documents, the bad ones included: creased cab photos, faxes, subcontractor invoices and CMR notes. Mark which fields matter on each and what a mistake would cost you. Note where each type arrives today and who reads it now. That sample is what any honest supplier should test against before promising anything.
- 03
Who should own it
Usually the person who runs billing or the traffic office, because they live with the matching every day. Accounts should own the rules for haulier invoices, and the claims or customer service lead should decide which remarks trigger action. Someone has to own the review queue each morning, or it quietly becomes the new pile.
- 04
How you will know it is working
Watch how soon proof is matched after a drop, how many documents need a person, and whether that share falls as the system settles on your senders. Watch the gap between delivery and invoice, and whether damage remarks reach account managers on the day. A review queue that grows week on week is the early warning.
Terms worth knowing
The words you will meet
- OCR and intelligent document processing
- OCR turns a picture of text into text. Intelligent document processing goes further: it works out which value is the consignment number, checks it against your records, and sends unsure cases to a person. For delivery paperwork, the checking and matching matter more than the reading.
- eCMR
- The electronic CMR consignment note for international road journeys. Its protocol has applied between the countries that joined it since 5 June 2011, and in the UK since 19 March 2020. Separately, EU authorities must accept freight information shared through certified eFTI platforms from 9 July 2027.
- Human in the loop
- A design where the system suggests and a person confirms whenever it is unsure or the stakes are high. For logistics paperwork that usually means damage remarks, customs values and invoice mismatches. It lets you automate the routine documents without trusting a machine with the costly exceptions.
Handled with care
The details that matter here
Documents in logistics decide who pays for damage, delay and waiting time. These are the details we handle with particular care.
A person decides what matters
We agree with you which fields and documents always go to a person: remarks about damage, customs values, invoices that do not match. The system suggests and a member of your team confirms. Thresholds start strict and are relaxed only when your own records show they can be.
The original always kept
Every extracted value keeps a link to the image it came from, along with what was read, when, and who confirmed it. In a dispute, anyone with access can open the original note in a couple of clicks and see the signature and the remark for themselves.
Where documents are processed
Delivery notes carry names, addresses and signatures, and customs paperwork carries commercial detail. We agree with your data protection lead where documents are processed and stored, how long they are kept and which services may see them, and give you a written map of the data flow.
Measured on your own paperwork
Before anything goes live we run a sample of your real documents through it, creased photos and all, and show you how many were read correctly and how many needed a person. We repeat that check after go-live, because layouts and senders change.
Guides
Worth reading first
Questions
What buyers ask first
Can OCR read handwritten delivery notes and bad photos?
Often, but not always, and we say so plainly. Neat printed documents are the easy case. Handwritten remarks and dark, creased photos are harder, so more of them land in the review queue for a person to check. The biggest help is stopping bad photos at source: the driver app asks for a retake while the driver is still at the drop.
Do customers and subcontractors have to send documents differently?
No. Coping with what already arrives is the point. If a large customer can send structured data instead of a PDF, that is cheaper and more reliable than reading it, and we will suggest it. But nobody has to change their paperwork for the system to be useful, and small hauliers can keep emailing scans exactly as they do now.
Can POD processing post straight into our accounts?
Only what you agree it may. A sensible start is every document going past a person, then letting clean, fully matched delivery notes through on their own once your records show it is safe to. Anything with a damage remark, a mismatch or an unusual charge can stay with a person for as long as you want.
What happens when a sender changes their delivery note layout?
Small changes usually make little difference, because documents are read for meaning rather than position. A bigger change lowers the system's confidence on that sender's documents, which sends more of them to a person instead of passing them through. If we look after it for you, we watch for senders whose documents suddenly need more checking, and adjust the system when that happens.
Will eCMR make document processing unnecessary?
Probably not entirely. eCMR covers international road journeys, and only where both sides and the platform support it. When an eCMR platform can share its data, we take that data in directly and skip the reading. Domestic delivery notes, customers' own paperwork and subcontractor invoices still arrive as documents, so the two usually run side by side.
Send us a pile of real delivery notes
Share a sample of the paperwork you receive, creased photos included. We will reply within 48 hours with which parts could be read automatically and which should stay with a person.
More for logistics
What else we build for logistics
Driver and proof-of-delivery apps
The day's manifest on the driver's phone, scanning at load and drop, photo and signature capture at the door, reason codes for failed deliveries, and everything saved safely when signal drops and synced as soon as it returns.
Customer tracking and booking
A portal where customers book collections, follow their consignments live, download proof of delivery and invoices, and see their own history, so the questions they used to phone about are answered before they think to ask.
Operations and fleet dashboards
Drops completed, late and failed, vehicle utilisation and on-time performance by customer, route and depot, on a wallboard in the office and a phone in the yard, so problems show up during the shift rather than at month end.
Dispatch and planning tools
Internal screens for your planners: jobs allocated to vehicles and drivers, capacity and delivery windows visible at a glance, and changes pushed straight to the driver's app, replacing the whiteboard and the spreadsheet only one person can read.
Systems that talk together
Orders from customers' systems flowing into your transport software, completed jobs flowing on to your accounts, and every scheduled transfer watched, so a silent failure becomes an alert the same day rather than a month-end surprise.
